| Tel：0086-21-58386258 E-mail:crushingplant@gmail.com
Web:http://www.zenithcrusher.com
Pursuing the Zenith Technology and Quality!
XZM Ultrafine Mill
Zenith XZM Ultrafine mill is widely used in making fine powder or micro powder, a new kind of machine for producing fineness and ultra-powder. It is mainly used for grinding the material with middle and low hardness, below 6% moisture, and the material should be non-explosion and non-flammability, such as: calcite, chalk, limestone, dolomite, kaolin, bentonite, steatite, mica, magnetite, iolite, pyrophillite, vermiculite, meerschaum, attapulgite, diatomite, barite, gypsum, alunite, graphite, fluorite, phosphate ore, potassium ore pumice, etc. The size of the finished production can be adjusted between 325-2500 mesh.
Ultrafine mill Features:
1. Reliable
2. High capacity and low cost
3. Easy adjustment of product fineness
4. Clean, environmental protection
Ultrafine mill Technical Data:
Tab 1:
item
XZM215
XZM221
XZM227
Number of roller(piece)
15
21
27
Ring diameter(mm)
Φ600
Φ 800
Φ1000
Number of ring (piece)
2
2
2
main equipment rotate speed（r/min）
235
235
235
Max. inlet size（mm）
<10
<10
<10
Final size (mesh)
325－2500
325-2500
325-2500
Capacity（kg/h）
350-2500
600－4000
900－6000
Overall size（m）
1025.5
12.42.55.8
14.53.86.3
Note: If there is any change of above specification, it is all according to the booklet with machine.
Tab2:
Basic data
Item
Unit
specification
XZM215
XZM221
XZM227
motor of main machine
Model
-
Y250-4
Y250-4
Y250-4
Power
kw
37
55
110
classify Frequency
modulation motor
Model
-
Y180M-4
Y180M-4
Y180M-4
Power
kw
11
18.5
30
Motor of elevator
Model
-
Y100L-4
Y100L-4
Y100L-4
Power
kw
3
3
3
Motor of blower
Model
-
Y225M-2
Y225M-2
Y225M-2
Power
kw
30
45
90
Hammer crusher
Model
-
250-400
250-400
250-400
Power
kw
5.5
5.5
5.5
Electromagnetism Vibrating feeder
Model
-
GZ1F
GZ1F
GZ1F
Power
kw
0.06
0.06
0.06
discharge valve
Model
-
ZJD-1：40
ZJD-1：40
ZJD-1：40
Power
kw
0.75
0.75
1.1
Pulsed duster
Model
-
BMC72-11
BMC72-11
BMC72-11
Power
kw
3
3
3
Note: If there is any change of above specification, it is all according to the booklet with machine. |
